EV Charging Station NS Blue EVC200300200 - 22kW Victron Energy

EV Charging Station NS Blue EVC200300200 - 22kW Victron Energy

Victron Energy's EV Charging Station NS is a high performance EV charging station

The station can operate three-phase and single-phase. It provides a maximum charging power of 22 kW AC in three-phase mode, or 7.3 kW in single-phase mode.

Built-in Wi-Fi communication
Wi-Fi: 802.11 b/g/n for configuration and traffic monitoring.
The internal Wifi module can be configured in Access Point mode or in Station mode for initial setup and monitoring.

Light ring for quick display of device status

Fully programmable RGB light ring around the charging port for quick indication of device status.
From the web interface, it can be programmed to display different light effects according to the current state (unplugged, charging, charged, etc.). The aim is to help the user see the current status of the charging station remotely.

Three working modes are available:

1/ Manual mode for output current configuration
Manual mode allows you to configure the output current between 6-32A.
Charging performance is controlled in two ways: via the website, from the GX device, VRM and via the VictronConnect app. Allows you to manually start or stop the charging process when the vehicle is connected to the charging station.

2/ Automatic mode to ensure maximum efficiency of the PV system
It detects when excess power is available and uses only that power to charge the vehicle.

3/ Scheduled mode for charging the electric car at certain time intervals. The fully programmable scheduler allows charging at different time intervals, for example at certain times of the night when energy from the grid is cheaper.

Integration with GX Victron Energy devices
The EV charging station can be configured and monitored via the screen of the GX device (e.g. Color Control or GX TOUCH panel) and the remote console.

Integration with the VRM portal
Several options are available in the VRM portal: real-time reports, custom reports for configurable time periods, advanced features such as remote firmware update.

TECHNICAL PARAMETERS:
Input voltage: 170-265 V AC
Charging current: 32 A per phase
Nominal power: 22 kW
Charging current range: 6-32 A
Adjustable max. current: 10-32 A
Adjustable min. current: 6-1A below max current
Wifi standard: 802.11 b/g/n (2.4Ghz only)
Own consumption: 15mA@230V
Working temperature: -25°C to +50°C
Data communication: Modbus TCP over WIFI, Bluetooth
Connection: 6-10mm2
Protection against water: IP44
Cooling: not necessary
Weight: 3kg
Dimensions: 372 x 292 x 122 mm

datasheet-en-8340.pdf

instructions-en-8341.pdf